Kickover Tools
B & T K Kickover Tool Specifications Sheets
The B & T K Kickover Tool is used in selectively locating 1” O.D. wireline devices in side-pocket mandrels.
The B & T K Kickover Tool is used in selectively locating 1” O.D. wireline devices in side-pocket mandrels.
B & T L Kickover Tool Specifications Sheets
The B & T L Kickover Tool is used in selectively locating 1” and 1.500" O.D. gaslift valves in side-pocket mandrels.
The B & T L Kickover Tool is used in selectively locating 1” and 1.500" O.D. gaslift valves in side-pocket mandrels.
B & T L2D Kickover Tool Specifications Sheets
The B & T L2D Kickover Tool is used in locating 1” and 1.500” retrievable wireline devices in side-pocket mandrels.
The B & T L2D Kickover Tool is used in locating 1” and 1.500” retrievable wireline devices in side-pocket mandrels.
B & T Merla Style HDTMP Kickover Tool Specifications Sheets
The B & T Merla Style HDTMP Kickover Tool is used to install or retrieve 1” O.D. gas lift valves into side-pocket mandrels.
The B & T Merla Style HDTMP Kickover Tool is used to install or retrieve 1” O.D. gas lift valves into side-pocket mandrels.
B & T Merla Style HDTP Kickover Tool Specifications Sheets
The B & T Merla Style HDTP Kickover Tool is used to install or retrieve 1.500” O.D. gas lift valves into side-pocket mandrels.
The B & T Merla Style HDTP Kickover Tool is used to install or retrieve 1.500” O.D. gas lift valves into side-pocket mandrels.
B & T OK-1 Kickover Tool Specifications Sheets
The B & T OK-1 Kickover Tool is used in order to install and retrieve 1” O.D. gas lift valves into side-pocket mandrels containing an orienting sleeve. The OK-1 Kickover Tool must be disassembled in order to be repinned.
The B & T OK-1 Kickover Tool is used in order to install and retrieve 1” O.D. gas lift valves into side-pocket mandrels containing an orienting sleeve. The OK-1 Kickover Tool must be disassembled in order to be repinned.
B & T OK-5 Kickover Tool Specifications Sheets
The B & T OK-5 Kickover Tool is used in order to install and retrieve 1” O.D. gas lift valves into side-pocket mandrels containing an orienting sleeve. The OK-5 Kickover Tool is very similar to the OK-1 Kickover Tool except that the OK-5 Kickover Tool uses a ball and spring design in order to allow easy redress operations.
The B & T OK-5 Kickover Tool is used in order to install and retrieve 1” O.D. gas lift valves into side-pocket mandrels containing an orienting sleeve. The OK-5 Kickover Tool is very similar to the OK-1 Kickover Tool except that the OK-5 Kickover Tool uses a ball and spring design in order to allow easy redress operations.
B & T OK-6 Kickover Tool Specifications Sheets
The B & T OK-6 Kickover Tool is used in order to install and retrieve 1” O.D. devices into side-pocket mandrels containing an orienting sleeve. The OK-6 Kickover Tool is very similar to the OK-5 Kickover Tool in that both tools use a ball and spring design in order to allow easy redress operations.
The B & T OK-6 Kickover Tool is used in order to install and retrieve 1” O.D. devices into side-pocket mandrels containing an orienting sleeve. The OK-6 Kickover Tool is very similar to the OK-5 Kickover Tool in that both tools use a ball and spring design in order to allow easy redress operations.
B & T OM-1 Kickover Tool Specifications Sheets
The B & T OM-1 Kickover Tool is used in order to install and retrieve 1.500” O.D. devices in side-pocket mandrels containing an orienting sleeve. The OM-1 Kickover Tool works by placing its locator finger into the side-pocket. This is achieved by pulling upward on the tool at the desired depth. If the tool is over-pulled, the springs will become active in order to make the arm and the attached running tools or pulling tools pivot near the side-pocket. The housing will protect the running tools and pulling tools that are to be used in the side-pocket applications. The OM-1 Kickover Tool needs only minimal disassembly in order to be repinned.
The B & T OM-1 Kickover Tool is used in order to install and retrieve 1.500” O.D. devices in side-pocket mandrels containing an orienting sleeve. The OM-1 Kickover Tool works by placing its locator finger into the side-pocket. This is achieved by pulling upward on the tool at the desired depth. If the tool is over-pulled, the springs will become active in order to make the arm and the attached running tools or pulling tools pivot near the side-pocket. The housing will protect the running tools and pulling tools that are to be used in the side-pocket applications. The OM-1 Kickover Tool needs only minimal disassembly in order to be repinned.
B & T OM-5 Kickover Tool Specifications Sheets
The B & T OM-5 Kickover Tool is used in order to install and retrieve 1.500” O.D. devices in side-pocket mandrels containing an orienting sleeve. The OM-1 Kickover Tool works by placing its locator finger into the side-pocket. This is achieved by pulling upward on the tool at the desired depth. If the tool is over-pulled, the springs will become active in order to make the arm and the attached running tools or pulling tools pivot near the side-pocket. The housing will protect the running tools and pulling tools that are to be used in the side-pocket applications. The OM-5 Kickover Tool does not need disassembly in order to be repinned.
The B & T OM-5 Kickover Tool is used in order to install and retrieve 1.500” O.D. devices in side-pocket mandrels containing an orienting sleeve. The OM-1 Kickover Tool works by placing its locator finger into the side-pocket. This is achieved by pulling upward on the tool at the desired depth. If the tool is over-pulled, the springs will become active in order to make the arm and the attached running tools or pulling tools pivot near the side-pocket. The housing will protect the running tools and pulling tools that are to be used in the side-pocket applications. The OM-5 Kickover Tool does not need disassembly in order to be repinned.
B & T R Kickover Tool Specifications Sheets
The B & T R Kickover tool is used to install and retrieve 1.500" O.D. assemblies in side-pocket mandrels.
The B & T R Kickover tool is used to install and retrieve 1.500" O.D. assemblies in side-pocket mandrels.