Pulling Tools
B & T Bell Guide Specifications Sheets
A B & T Bell Guide is used in conjunction with a pulling tool to direct the pulling tool towards the desired fishneck in a wide well opening. This removes the need for a B & T Tubing Centralizer, and can be a much cheaper way of centering the assembly within the tubing.
A B & T Bell Guide is used in conjunction with a pulling tool to direct the pulling tool towards the desired fishneck in a wide well opening. This removes the need for a B & T Tubing Centralizer, and can be a much cheaper way of centering the assembly within the tubing.
B & T Bull Dog Spear Specifications Sheets
The B & T Bull Dog Spear is designed to pull tools as a last resort situation. The tool is designed to get inside of an I.D. and the slips will expand to latch onto the wall in order to pull out the desired tool.
Please specify the following when ordering the Bull Dog Spear:
The B & T Bull Dog Spear is designed to pull tools as a last resort situation. The tool is designed to get inside of an I.D. and the slips will expand to latch onto the wall in order to pull out the desired tool.
Please specify the following when ordering the Bull Dog Spear:
- The minimum I.D. of the targeted assembly
- The well conditions and limitations so as to prevent the Bull Dog Spear from being unable to locate the target properly
B & T GG Fishing Socket Specifications Sheets
The B & T GG Fishing Socket is a non-releasable pulling tool.
The B & T GG Fishing Socket is a non-releasable pulling tool.
B & T GR Adapter Specifications Sheets
The B & T GR Adapter is used in conjunction with the B & T GS Pulling Tool to convert it into a jar up to release type tool.
The shear pin of the GS Pulling Tool must be removed after the GR Adapter is installed in the assembly.
The B & T GR Adapter is used in conjunction with the B & T GS Pulling Tool to convert it into a jar up to release type tool.
The shear pin of the GS Pulling Tool must be removed after the GR Adapter is installed in the assembly.
B & T GS Pulling Tool Specifications Sheets
The B & T GS Pulling Tool is used to latch internal fishnecks on B & T equipment that requires being sheared down before being pulled.
The GS Pulling Tool is a shear down assembly, but the addition of a GR Adapter converts the GS Pulling Tool into a shear up assembly.
A GRL version with an extended core nose is available and required to pull D Locks.
The B & T GS Pulling Tool is used to latch internal fishnecks on B & T equipment that requires being sheared down before being pulled.
The GS Pulling Tool is a shear down assembly, but the addition of a GR Adapter converts the GS Pulling Tool into a shear up assembly.
A GRL version with an extended core nose is available and required to pull D Locks.
B & T Heavy-Duty Pulling Tool Specifications Sheets
The B & T Heavy-Duty Pulling Tool is a collet style pulling tool designed to latch and retrieve wireline tools where heavy jarring is required. The Heavy-Duty Pulling Tool is extremely durable and allows a full 360 degrees of engagement with the target fishneck.
The B & T Heavy-Duty Pulling Tool is a collet style pulling tool designed to latch and retrieve wireline tools where heavy jarring is required. The Heavy-Duty Pulling Tool is extremely durable and allows a full 360 degrees of engagement with the target fishneck.
B & T JD Pulling Tool Specifications Sheets
The B & T JD Pulling Tool is the jar down version of the J Pulling Tool series. It can accommodate different cores to change the reach of the tool during operation.
The B & T JD Pulling Tool is the jar down version of the J Pulling Tool series. It can accommodate different cores to change the reach of the tool during operation.
- The C core is the longest core, but it has the shortest reach.
- The S core has a medium length, and a medium reach.
- The L core is a short core with the longest reach.
B & T JU Pulling Tool Specifications Sheets
The B & T JU Pulling Tool is the jar up version in the J Pulling Tool series. It can accommodate different cores to change the reach of the tool during operation.
The B & T JU Pulling Tool is the jar up version in the J Pulling Tool series. It can accommodate different cores to change the reach of the tool during operation.
- The C core is the longest core, but it has the shortest reach.
- The S core has a medium length, and a medium reach.
- The L core is a short core with the longest reach.
B & T Multifunctional Pulling Tool Specifications Sheets
The B & T Multifunctional Pulling Tool combines the functionality of both shear up and shear down tools. This tool can switch between shear up and shear down modes without the need of accessory parts. It can replace each of the following: B & T JD Pulling Tools, B & T JU Pulling Tools, B & T R Pulling Tools, and S Pulling Tools. The core of the Multifunctional Pulling Tool is able to be pinned in different locations on the tool so as to provide different reaches and assembly lengths. The shear pin is even able to be changed out without disassembling the Multifunctional Pulling Tool.
The B & T Multifunctional Pulling Tool combines the functionality of both shear up and shear down tools. This tool can switch between shear up and shear down modes without the need of accessory parts. It can replace each of the following: B & T JD Pulling Tools, B & T JU Pulling Tools, B & T R Pulling Tools, and S Pulling Tools. The core of the Multifunctional Pulling Tool is able to be pinned in different locations on the tool so as to provide different reaches and assembly lengths. The shear pin is even able to be changed out without disassembling the Multifunctional Pulling Tool.
B & T Non-Releaseable Overshot Specifications Sheets
The B & T Non-Releaseable Overshot is used to retrieve tools that have no fishneck, or if the tool's fishneck is damaged. The Non-Releaseable Overshot latches around the targeted assembly to provide a new fishneck.
The B & T Non-Releaseable Overshot is used to retrieve tools that have no fishneck, or if the tool's fishneck is damaged. The Non-Releaseable Overshot latches around the targeted assembly to provide a new fishneck.
B & T PRS Pulling Tool Specifications Sheets
The B & T PRS Pulling Tool is a shear releasing tool used in pulling subsurface devices which have internal fishnecks. The PRS Pulling Tool can be configured to shear up or down depending upon the pulling operations.
The B & T PRS Pulling Tool is a shear releasing tool used in pulling subsurface devices which have internal fishnecks. The PRS Pulling Tool can be configured to shear up or down depending upon the pulling operations.
B & T R Pulling Tool Specifications Sheets
The B & T R Pulling Tool is a shear up releasing tool designed to pull equipment with an external fishneck. The following cores are available for the B & T R Pulling Tool:
The B & T R Pulling Tool is a shear up releasing tool designed to pull equipment with an external fishneck. The following cores are available for the B & T R Pulling Tool:
- The B core is a long core, and offers a short reach.
- The S core is a medium length, and offers a medium reach.
- The J core is a short core, and offers a long reach.
- The Q core is unique in that it latches onto male connectors, and is a very short core.
B & T Releaseable Overshot Specifications Sheets
B & T's Releaseable Overshot is used to retrieve tools that have no fishneck, or if the tool's fishneck is damaged. This assembly has multiple Cores that are able to change the length of the assembly, thus granting varying reaches. If a device cannot be recovered, jarring the assembly down will shear the releasing pin, thus allowing the B & T Releaseable Overshot to release the targeted assembly.
B & T's Releaseable Overshot is used to retrieve tools that have no fishneck, or if the tool's fishneck is damaged. This assembly has multiple Cores that are able to change the length of the assembly, thus granting varying reaches. If a device cannot be recovered, jarring the assembly down will shear the releasing pin, thus allowing the B & T Releaseable Overshot to release the targeted assembly.
B & T Releasing Tool Specifications Sheets
The B & T Releasing Tool is used to release the fishneck from the skirt on the B & T R Pulling Tool and the B & T S Pulling Tool.
The B & T Releasing Tool is used to release the fishneck from the skirt on the B & T R Pulling Tool and the B & T S Pulling Tool.
B & T Repinning Tool Specifications Sheets
The B & T Repinning Tool is used to put shear pins into running and pulling tools.
The B & T Repinning Tool is used to put shear pins into running and pulling tools.
B & T S Pulling Tool Specifications Sheets
The B & T S Pulling Tool is a shear down tool used to latch and pull tools that have external fishnecks. The S Pulling Tool is especially useful for running various equipment that land against a positive No-Go. The following cores are available for the S Pulling Tool:
The B & T S Pulling Tool is a shear down tool used to latch and pull tools that have external fishnecks. The S Pulling Tool is especially useful for running various equipment that land against a positive No-Go. The following cores are available for the S Pulling Tool:
- The B core is very long core, and offers a short reach.
- The S core is a medium length, and offers a medium reach.
- The M core is used primarily in gas-lift operations.
- The J core is also available upon special request.
B & T SSJ Pulling Tool Specifications Sheets
The B & T SSJ Pulling Tool releases targeted assemblies by either jarring down on its core or skirt. This is a flexible way for an operator to pull assemblies, because it means that an assembly can be pulled without having to manipulate the cores. The SSJ Pulling Tool is primarily used to pull B & T X Selective Test Tool.
The B & T SSJ Pulling Tool releases targeted assemblies by either jarring down on its core or skirt. This is a flexible way for an operator to pull assemblies, because it means that an assembly can be pulled without having to manipulate the cores. The SSJ Pulling Tool is primarily used to pull B & T X Selective Test Tool.