Baker Style Equipment
B & T A Probe Specifications Sheets
The B & T A Probe is a wireline manipulated device that is used to retract the four locking dogs on a B & T S Lock in order to remove it from a B & T S Landing Nipple.
The B & T A Probe is a wireline manipulated device that is used to retract the four locking dogs on a B & T S Lock in order to remove it from a B & T S Landing Nipple.
B & T A Prong Specifications Sheets
The B & T A Prong is used to set and pull various baker style equipment, especially flow control equipment.
Please specify the length required when ordering the A Prong, as B & T manufactures A Prongs to meet customer requirements.
The B & T A Prong is used to set and pull various baker style equipment, especially flow control equipment.
Please specify the length required when ordering the A Prong, as B & T manufactures A Prongs to meet customer requirements.
B & T A Shank Specifications Sheets
The B & T A Shank can be run by the B & T C-1 Running Tool or any other internally threaded running tool. It is used to collapse the downward facing dogs on selective B & T S Locks, B & T W Locks, and B & T Z Locks.
The A Shank may also be used as a connection between the running tool and an A Prong.
The B & T A Shank can be run by the B & T C-1 Running Tool or any other internally threaded running tool. It is used to collapse the downward facing dogs on selective B & T S Locks, B & T W Locks, and B & T Z Locks.
The A Shank may also be used as a connection between the running tool and an A Prong.
B & T B Probe Specifications Sheets
The B & T B Probe is a wireline manipulated device that is used to close the two locking dogs on a B & T W Lock or B & T Z Lock in order to remove it from the landing nipple.
The B & T B Probe is a wireline manipulated device that is used to close the two locking dogs on a B & T W Lock or B & T Z Lock in order to remove it from the landing nipple.
B & T D-2 Shifting Tool Specifications Sheets
The B & T D-2 Shifting Tool is used to provide a safe, selective, and controlled method of opening and closing TL circulating sleeves.
The B & T D-2 Shifting Tool is used to provide a safe, selective, and controlled method of opening and closing TL circulating sleeves.
B & T FB-2 Equalizing Check Valve Specifications Sheets
The B & T FB-2 Equalizing Check Valve prevents fluid flow from above the tool, yet still allows fluid flow from below the tool. The FB-2 Equalizing Check Valve will sit in the No-Go of a TF profile, which prevents downward movement.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FB-2 Equalizing Check Valve.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
The B & T FB-2 Equalizing Check Valve prevents fluid flow from above the tool, yet still allows fluid flow from below the tool. The FB-2 Equalizing Check Valve will sit in the No-Go of a TF profile, which prevents downward movement.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FB-2 Equalizing Check Valve.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
B & T FSB Bomb Hanger Specifications Sheets
The B & T FSB Bomb Hanger performs the same functions as the FWB Bomb Hanger, utilizing a B & T S Lock.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FSB Bomb Hanger.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
The B & T FSB Bomb Hanger performs the same functions as the FWB Bomb Hanger, utilizing a B & T S Lock.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FSB Bomb Hanger.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
B & T FSG Blanking Plug Specifications Sheets
The B & T FSG Blanking Plug allows fluid to by-pass through the side ports when running in the well. It contains 2 sets of dogs, one set in the upward position, and one set in the downward position, to lock in place against pressure.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FSG Blanking Plug.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
The B & T FSG Blanking Plug allows fluid to by-pass through the side ports when running in the well. It contains 2 sets of dogs, one set in the upward position, and one set in the downward position, to lock in place against pressure.
A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the FSG Blanking Plug.
A B & T C-1 Running Tool or a JD Pulling Tool can be used to run and set the tool.
B & T FWB Bomb Hanger Specifications Sheets
The B & T FWB Bomb Hanger is used to land and lock downhole measuring instruments in TF profiles.
The B & T FWB Bomb Hanger is used to land and lock downhole measuring instruments in TF profiles.
B & T FWG Blanking Plug Specifications Sheets
The B & T FWG Blanking Plug will be set and locked in the F profile. Once it has been properly locked it will allow fluid to bypass through its side ports. This will allow pressure to be held in either direction.
The FWG Blanking Plug can be equalized and pulled with standard wireline tools.
The B & T FWG Blanking Plug will be set and locked in the F profile. Once it has been properly locked it will allow fluid to bypass through its side ports. This will allow pressure to be held in either direction.
The FWG Blanking Plug can be equalized and pulled with standard wireline tools.
B & T M / F Lock Specifications Sheets
The B & T F Lock with packing gland is a top No-Go lock used in TF type profiles. The F Lock has a No-Go shoulder to prevent downward movement and collet type locking fingers to prevent upward movement. The I.D. of the lock has relatively smooth, uninterrupted flow path and is excellent for high volume completions. When the packing gland and packing unit assembly is made up, the item becomes a B & T M Lock.
The B & T F Lock with packing gland is a top No-Go lock used in TF type profiles. The F Lock has a No-Go shoulder to prevent downward movement and collet type locking fingers to prevent upward movement. The I.D. of the lock has relatively smooth, uninterrupted flow path and is excellent for high volume completions. When the packing gland and packing unit assembly is made up, the item becomes a B & T M Lock.
B & T N-1 Probe Specifications Sheets
The B & T N-1 Probe is used to pull and retrieve Baker style equipment, specifically the B & T N, G, L, or R Locks.
The B & T N-1 Probe is used to pull and retrieve Baker style equipment, specifically the B & T N, G, L, or R Locks.
B & T N-1 Shank Specifications Sheets
The B & T N-1 Shank is used to run and set Baker style equipment, specifically the B & T N, G, L, or R Locks.
The B & T N-1 Shank is used to run and set Baker style equipment, specifically the B & T N, G, L, or R Locks.
B & T RB-2 Equalizing Check Valve Specifications Sheets
The B & T RB-2 Equalizing Check Valve is similar to the B & T FB-2 Equalizing Check Valve. The RB-2 Equalizing Check Valve's packing mandrel does not have a No-Go.
The O.D. of the mandrel sits in the profile. A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the RB-2 Equalizing Check Valve. A B & T C-1 Running Tool or a B & T JD Pulling Tool can be used to run and set the tool.
The B & T RB-2 Equalizing Check Valve is similar to the B & T FB-2 Equalizing Check Valve. The RB-2 Equalizing Check Valve's packing mandrel does not have a No-Go.
The O.D. of the mandrel sits in the profile. A B & T S Pulling Tool or a B & T JD Pulling Tool can be used to pull and set the RB-2 Equalizing Check Valve. A B & T C-1 Running Tool or a B & T JD Pulling Tool can be used to run and set the tool.
B & T RZB Bomb Hanger Specifications Sheets
The B & T RZB Bomb Hanger works in similar fashion to the B & T FSB Bomb Hanger, utilizing a B & T Z Lock.
The B & T RZB Bomb Hanger works in similar fashion to the B & T FSB Bomb Hanger, utilizing a B & T Z Lock.
B & T RZG Blanking Plug Specifications Sheets
The B & T RZG Blanking Plug works in the same way as the B & T FWG Blanking Plug however the RZG Blanking Plug does not feature a No-Go on the lock. Instead, the No-Go is located on the G bottom. The RZG Blanking Plug will be set and locked in the F profile. Once it has been properly locked it will allow fluid to bypass through its side ports. This will allow pressure to be held in either direction. The RZG Blanking Plug can be equalized and pulled with standard wireline tools.
The B & T RZG Blanking Plug works in the same way as the B & T FWG Blanking Plug however the RZG Blanking Plug does not feature a No-Go on the lock. Instead, the No-Go is located on the G bottom. The RZG Blanking Plug will be set and locked in the F profile. Once it has been properly locked it will allow fluid to bypass through its side ports. This will allow pressure to be held in either direction. The RZG Blanking Plug can be equalized and pulled with standard wireline tools.
B & T S Lock (Type B) Specifications Sheets
The B & T S Lock has four locking dogs. Two of these dogs face upward and prevent the assembly from moving upward. The other two dogs face downward and prevent downward movement without needing a No-Go shoulder.
The B & T S Lock has four locking dogs. Two of these dogs face upward and prevent the assembly from moving upward. The other two dogs face downward and prevent downward movement without needing a No-Go shoulder.
B & T W Lock (Type B) Specifications Sheets
The B & T W Lock is used with B & T F Landing Nipples. The B & T W Lock has a top No-Go to prevent downward movement. The dogs on the W Lock are upward facing and prevent the assembly from moving upward.
The B & T W Lock is used with B & T F Landing Nipples. The B & T W Lock has a top No-Go to prevent downward movement. The dogs on the W Lock are upward facing and prevent the assembly from moving upward.
B & T Z Lock Specifications Sheets
The B & T Z Lock is used with B & T R Landing Nipples. The B & T Z Lock has upward facing dogs to prevent upward movement. The No-Go shoulder is located on the downhole accessory and No-Go’s in the bottom No-Go of the B & T R Landing Nipple prevent downward movement.
The B & T Z Lock is used with B & T R Landing Nipples. The B & T Z Lock has upward facing dogs to prevent upward movement. The No-Go shoulder is located on the downhole accessory and No-Go’s in the bottom No-Go of the B & T R Landing Nipple prevent downward movement.