Surface Packoff Equipment
B & T Bell Type Packoff Specifications Sheets
B & T manufactures the following components compatible with the Bell Type Packoff:
Upper and lower metals are made from casted brass.
B & T manufactures the following components compatible with the Bell Type Packoff:
- OS9S BRASS UPPER BUSHING
- OS9S LINE WIPER
- OS9S BRASS LOWER BUSHING
- OS9S BRASS LOWER BUSHING CAGE
Upper and lower metals are made from casted brass.
B & T Coiled Tubing Stripper Specifications Sheets
B & T provides many Coiled Tubing Stripper products to suit your needs including red/green and yellow/blue as well as energizers and Non-Extrusion Rings. B & T also provides swivel packing kits and face seals.
B & T provides many Coiled Tubing Stripper products to suit your needs including red/green and yellow/blue as well as energizers and Non-Extrusion Rings. B & T also provides swivel packing kits and face seals.
B & T Enviro Type Grease Head Specifications Sheets
B & T manufactures the following components compatible with the Enviro Type Grease Head:
The standard compound suitable for most applications is 70 durometer NBR packoff rubber and a 50 durometer SBR/Natural line wiper rubber. Brass parts are made of casted brass and brass materials.
B & T manufactures the following components compatible with the Enviro Type Grease Head:
- OS9S BRASS UPPER BUSHING
- ENVIRO TYPE UPPER GLAND *
- BOWEN MINI PACKOFF RUBBER
- ENVIRO TYPE SPACER
- OS9S LINE WIPER
- ENVIRO TYPE LOWER GLAND
The standard compound suitable for most applications is 70 durometer NBR packoff rubber and a 50 durometer SBR/Natural line wiper rubber. Brass parts are made of casted brass and brass materials.
B & T Flow Tube Specifications Sheets
B & T manufactures some of the highest quality Flow Tubes on the market. Each Flow Tube is precision drilled from 4140 raw stock and maintains tolerances of .002” in every line size. Every tube is measured with certified pin gauges to ensure precision throughout the body, not just at the ends. Single sided wrench flats are milled and stamped with the line size so the customer will never have to measure or guess the size of a tube, even after repeated use. As with all B & T parts, full traceability is available for every tube and documentation can be provided if required. Upon customer request each Flow Tube may be treated in a Kolene® nitrocarburization process that adds corrosion and wear resistance.
B & T manufactures some of the highest quality Flow Tubes on the market. Each Flow Tube is precision drilled from 4140 raw stock and maintains tolerances of .002” in every line size. Every tube is measured with certified pin gauges to ensure precision throughout the body, not just at the ends. Single sided wrench flats are milled and stamped with the line size so the customer will never have to measure or guess the size of a tube, even after repeated use. As with all B & T parts, full traceability is available for every tube and documentation can be provided if required. Upon customer request each Flow Tube may be treated in a Kolene® nitrocarburization process that adds corrosion and wear resistance.
B & T HLWA Open Hole Packoff Specifications Sheets
B & T manufactures the following components compatible with the HLWA Open Hole Packoff:
The standard compound suitable for most applications is NBR 80.
B & T manufactures the following components compatible with the HLWA Open Hole Packoff:
- HLWA PTFE
- HLWA PACKOFF RUBBER
- HLWA PTFE
The standard compound suitable for most applications is NBR 80.
B & T HLWB Open Hole Packoff Specifications Sheets
B & T manufactures the following components compatible with the HLWB Open Hole Packoff:
The standard compound suitable for most applications is NBR 80.
B & T manufactures the following components compatible with the HLWB Open Hole Packoff:
- HLWB PTFE
- HLWB PACKOFF RUBBER
- HLWB PTFE
The standard compound suitable for most applications is NBR 80.
B & T Large Bowen Grease Head Specifications Sheets
B & T manufactures the following components compatible with the Large Bowen Grease Head:
Upper and lower metals are made from casted steel.
B & T manufactures the following components compatible with the Large Bowen Grease Head:
- LARGE BOWEN UPPER BUSHING
- LARGE BOWEN LINE WIPER
- LARGE BOWEN INTERLOCKING SEAT
Upper and lower metals are made from casted steel.
B & T Medium Bowen Grease Head Specifications Sheets
B & T manufactures the following components compatible with the Medium Bowen Grease Head:
Upper and lower metals are made from casted steel.
B & T manufactures the following components compatible with the Medium Bowen Grease Head:
- MEDIUM BOWEN UPPER BUSHING
- MEDIUM BOWEN LINE WIPER
- MEDIUM BOWEN INTERLOCKING SEAT
Upper and lower metals are made from casted steel.
B & T Mini Bowen Grease Head Specifications Sheets
B & T manufactures the following components compatible with the Mini Bowen Grease Head:
Upper and lower metals are made from brass.
B & T manufactures the following components compatible with the Mini Bowen Grease Head:
- MINI BOWEN UPPER BUSHING
- MINI BOWEN LINE WIPERS
- MINI BOWEN INTERLOCKING SEAT
Upper and lower metals are made from brass.
B & T Swab Cup Specifications Sheets
B & T offers many different sizes and styles of Swab Cups in order to fulfill customer specifications.
B & T offers many different sizes and styles of Swab Cups in order to fulfill customer specifications.
B & T Type 410 Packoff Specifications Sheets
B & T manufactures the following components compatible with the Type 410 Packoff:
Type 410 rubber components are not made by B & T at this time.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion.
To check cross compatibility, please see the Cross Compatibility Chart.
B & T manufactures the following components compatible with the Type 410 Packoff:
- TYPE 410 UPPER BRASS
- TYPE 410 LOWER BRASS
Type 410 rubber components are not made by B & T at this time.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion.
To check cross compatibility, please see the Cross Compatibility Chart.
B & T Type C Packoff Specifications Sheets
B & T manufactures the following components compatible with the Type C Packoff:
The Type C Line Wiper is available in the full range of materials offered by B & T. Please consult the Elastomer Chart to find the proper compound for your specific application. The standard compound suitable for most applications is SBR/Natural 50. If a slightly harder rubber is desired with the same chemical characteristics, we recommend the standard NBR 60 material.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.
B & T manufactures the following components compatible with the Type C Packoff:
- TYPE C UPPER BRASS
- TYPE C LINE WIPER
- TYPE C LOWER BRASS
The Type C Line Wiper is available in the full range of materials offered by B & T. Please consult the Elastomer Chart to find the proper compound for your specific application. The standard compound suitable for most applications is SBR/Natural 50. If a slightly harder rubber is desired with the same chemical characteristics, we recommend the standard NBR 60 material.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.
B & T Type CL Packoff Specifications Sheets
B & T manufactures the following components compatible with the Type CL Packoff:
The Type CL Line Wiper Rubber is available in the full range of materials offered by B & T. Please consult the Elastomer Chart to find the proper compound for your specific application. The standard compound suitable for most applications is SBR/Natural 50. If a slightly harder rubber is desired with the same chemical characteristics, we recommend the standard NBR 60 material.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.
B & T manufactures the following components compatible with the Type CL Packoff:
- TYPE CL UPPER BRASS
- TYPE CL LINE WIPER RUBBER
- TYPE CL LOWER BRASS
The Type CL Line Wiper Rubber is available in the full range of materials offered by B & T. Please consult the Elastomer Chart to find the proper compound for your specific application. The standard compound suitable for most applications is SBR/Natural 50. If a slightly harder rubber is desired with the same chemical characteristics, we recommend the standard NBR 60 material.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.
B & T Type MT Packoff Specifications Sheets
B & T manufactures the following components compatible with the Type MT Packoff:
Type MT rubber components are not made by B & T at this time.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.
B & T manufactures the following components compatible with the Type MT Packoff:
- TYPE MT UPPER BRASS
- TYPE MT LOWER BRASS
Type MT rubber components are not made by B & T at this time.
PLEASE NOTE: Many parts for the Type C, Type CL, MT, and 410 injection heads are shared between different styles, part numbers are listed for each style to avoid confusion. To check cross compatibility, please see the Cross Compatibility Chart.